All posts by adamiano

Square Head Bolts

Rolled Threads

Nominal Width A/F Width A/F Width A/C Width A/C Height Height TPI MFL
Diameter Max Min Max Min Max Min LBS
3/8 0.562 0.544 0.795 0.747 0.268 0.232 16 4250
1/2 0.750 0.725 1.061 0.995 0.348 0.308 13 7800
5/8 0.938 0.906 1.326 1.244 0.444 0.400 11 12400
3/4 1.125 1.088 1.591 1.494 0.524 0.476 10 18350
7/8 1.312 1.269 1.856 1.742 0.620 0.568 9 25400
1 1.500 1.450 2.121 1.991 0.684 0.628 8 33500
Length of bolt Thread length
Upto and including 8″ 3”
Over and including 12″ 4”
Over 12″ 6”
  1. Square bolts supplied complete with one square nut unless otherwise specified
  2. Washers ( round and spring ) can be supplied if specified at additional cost
  3. All ferrous parts hot dip galvanized to ASTM A153
  4. Square bolts and nuts confirm to requirement of ANSI C135.1

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Oval eye Bolt

Forged Eye
Cut / rolled threads
Semi Cone Points

Catalog DIA ( D) C E MFL A
B0E-0.625 5/8 2 1-1/2 52 6 MIN
BOE-0.750 3/4 2 1-1/2 76 6 MIN
BOE-0.875 7/8 2 1-1/2 96 6 MIN
  1. B = 4 ( IF A =< 10 )
  2. B = 6 ( IF A > 10 )
  3. Please specify l1 when ordering by adding required length to the suffix of the catalog number
  4. Oval eye bolts supplied complete with one nut ( hex / square ) unless otherwise specified
  5. Washers ( round / spring ) can be supplied at additional cost
  6. All ferrous parts are hot dip galvanized to ASTM A153
  7. Oval eye bolts conforms to requirements of ANSI C135.4

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Anchor Rod (Thimble Eye )

Nuts may be hex or square And to be specified while ordering
Threads cut or rolled and to be specified while ordering

Catalog D1 A B C D E F TL MFL LBS Washer
ARSE-01 5/8 11/16 11/16 5/16 1/4 9/32 5/8 3-1/2 16000 4 X 4 X 3/16
ARSE-01 5/8 11/16 11/16 5/16 1/4 9/32 5/8 3-1/2 16000 4 X 4 X 3/16
  1. Anchor rods supplied with one square nut unless otherwise specified
  2. Washer can be supplied at additional cost.
  3. Recommended size of washer is as stated above.
  4. All ferrous parts hot dip galvanized to ASTM A153
  5. Thimble eye anchor rods conform to requirements of ANSI C135.2

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Stay Tightner

Catalog A B C D E F G D1
ST-01 150 20 08 130 44 20 20 12
ST-02 250 25 12 200 57 25 25 16
ST-03 300 28 16 240 65 25 25 20
    li>Stay tightner consist of a body and two end fittings which can be eye type, hook type, clevis type or in various shaped as required by buyer
  1. The body and end fittings are single piece forged construction
  2. Locks nuts can also be supplied to supplement tightening if ordered
  3. Thimble can also be supplied if ordered separately
  4. All ferrous parts are hot dip galvanized to ASTM A153 / BS 729

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Lag Screw

Catalog DIA ( D ) LENGTH ( A ) THREAD LENGTH( B )
INCH. M.M. INCH. M.M. INCH. M.M.
SL-10 1/4 6 1-1/2 38 1-1/4 30
SL-02 1/4 6 2-0/0 50 1-1/2 38
SL-03 1/4 6 2-1/2 65 1-3/4 45
SL-04 1/4 6 3-0/0 75 2-0/0 50
SL-05 5/16 8 2-0/0 50 1-1/2 38
SL-06 5/16 8 2-1/2 65 1-5/8 40
SL-07 5/16 8 3-0/0 75 2-0/0 50
SL-08 5/16 8 4-0/0 100 2-1/2 65
SL-09 3/8 10 3-0/0 75 2-0/0 50
SL-10 3/8 10 4-0/0 100 2-1/2 65
SL-11 1/2 12 3-0/0 75 2-1/4 55
SL-12 1/2 12 4-0/0 100 2-5/8 70
SL-13 1/2 12 4-1/2 115 2-5/8 70
SL-14 1/2 12 5-0/0 125 3-0/0 75
SL-15 5/8 16 5-0/0 125 3-1/2 90
  1. Lag Screw available with regular point , gimlet point and fetter point
  2. All ferrous parts are hot dip galvanized to ASTM A153 / BS 729

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Anchor Rod (Oval eye)

Nuts may be hex or square And to be specified while ordering
Threads cut or rolled and to be specified while ordering

Catalog Diameter B C E Washer MFL LBS Thimble
AROE-01 5/8 2 1-1/2 3-1/2 4 X 4 X 3/16 16000 1/4-3/8
AROE-02 3/4 2 1-1/2 3-1/2 4 X 4 X 1/4 23000 3/8-1/2
AROE-03 7/8 2 1-1/2 3-1/2 4 X 4 X 3/8 30000 1/2-5/8
  1. Anchor rod supplied complete with one square nut unless otherwise specified
  2. Please specify welded or forged by adding w or f to the suffix
  3. Washer and thimble can be supplied at additional cost.
  4. The recommended size of washer and thimble as stated above
  5. All ferrous parts hot dip galvanized to ASTM A153
  6. Oval eye anchor rods confirm to requirements of ANSI C135.2

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Insulated Clevis

Catalog A B C F D1 ( SLOT ) COTTER T
CLI-0313 4-3/16 1-1/2 7/8 2-3/8 11/16 X 13/16 1/2 3/16
CLI-0399 4-3/16 1-1/2 7/8 2-3/8 11/16 X 13/16 5/8 3/16
CLI-0342 5-0/0 1-1/2 7/8 3-3/8 11/16 X 13/16 5/8 1/4
CLI-0344 5-3/4 1-1/2 7/8 4-1/4 11/16 X 7/8 11/16 X 7/8 1/4
  1. Insulated Clevis supplied complete with one cotter and cotter pin
  2. All ferrous parts are hot dip galvanized except cotter pin which is made of stainless steel

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Adjustable pole bands

Catalog no.
Assembly
Type Pole dia
Dia ( A )
Size of
Studs ( B )
Lag Hole
Size ( D2)
Size of
Steel ( ExT)
PBA -01 4 WAY90 6-0/0-11-1/2 3/4×6 9/16 1/4×4
PBA -02 4 WAY90 9-1/2-14-0/0 3/4×6 9/16 1/4×4
PBA -03 4 WAY90 9-1/2-16-0/0 3/4×8 9/16 1/4×4
  1. Pole bands supplied complete with four studs or bolts and square nuts
  2. All ferrous parts are hot dip galvanized to ASTM A153 / BS 729

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice