Preformed Guy Grip Dead Ends

Catalog DIA MIN DIA MAX L COLOR CODE CATALOG DIA MIN DIA MAX L COLOR CODE
PP-GG-01 3.85 4.01 430 BLACK PP-GG-21 8.96 9.30 790 GREEN
PP-GG-02 4.02 4.19 440 BLACK PP-GG-22 9.31 9.68 830 GREEN
PP-GG-03 4.20 4.40 470 BLACK PP-GG-23 9.69 10.06 860 WHITE
PP-GG-04 4.41 4.60 480 ORANGE PP-GG-24 10.07 10.45 860 WHITE
PP-GG-05 4.61 4.80 520 ORANGE PP-GG-25 10.46 10.80 880 BLUE
PP-GG-06 4.81 5.00 520 ORANGE PP-GG-26 10.81 11.10 880 BLUE
PP-GG-07 5.01 5.23 530 RED PP-GG-27 11.11 11.45 920 BLUE
PP-GG-08 5.24 5.46 550 RED PP-GG-28 11.46 11.75 1000 BLACK
PP-GG-09 5.47 5.69 560 GREEN PP-GG-29 11.76 12.05 1075 BLACK
PP-GG-10 5.70 5.94 580 GREEN PP-GG-30 12.06 12.55 1150 ORANGE
PP-GG-11 5.95 6.20 610 BLUE PP-GG-31 12.56 13.05 1270 ORANGE
PP-GG-12 6.21 6.45 620 BLUE PP-GG-32 13.06 13.50 1300 RED
PP-GG-13 6.46 6.73 640 YELLOW PP-GG-33 13.51 13.94 1350 RED
PP-GG-14 6.74 7.01 660 YELLOW PP-GG-34 13.95 14.53 1380 GREEN
PP-GG-15 7.02 7.32 670 BLACK PP-GG-35 14.54 15.15 1460 GREEN
PP-GG-16 7.33 7.62 685 BLACK PP-GG-36 15.16 15.75 1530 BLUE
PP-GG-17 7.63 7.95 710 ORANGE PP-GG-37 15.76 16.36 1630 BLUE
PP-GG-18 7.96 8.28 740 ORANGE
PP-GG-19 8.29 8.58 760 RED
PP-GG-20 8.59 8.95 780 RED
  1. Guy grip dead ends are made of galvanized steel confirming to BS 443
  2. Heavy coating as per Class A-C of ASTM A495 are also available on request

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Drop wire dead ends

Catalog A B D
PPDE – 01 450 85 02
  1. Drop wire dead ends are made of stainless steel with
  2. Applied length coated with neoprene / polyvinyl compounds
  3. For use with insulated and jacketed conductors

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Preformed Armour Rod

Catalog Range Length Diameter Per Set Weight
PFA-10 14.0-14.9 1500 4.6 11 0.81
PFA-11 15.0-15.4 1550 4.6 12 0.91
PFA-12 15.5-16.0 1600 4.6 12 0.95
PFA-13 16.0-16.7 1600 4.6 12 0.95
PFA-14 16.7-17.3 1650 4.6 12 1.05
PFA-15 17.3-17.9 1700 5.2 12 1.29
PFA-16 17.9-18.8 1800 5.2 12 1.35
PFA-17 18.8-19.9 1800 5.2 13 1.47
PFA-18 19.9-20.7 1900 6.4 11 1.99
PFA-19 19.9-20.7 1900 6.4 11 1.99
PFA-20 21.4-23.1 1950 6.4 12 2.25
PFA-21 23.1-23.6 2000 6.4 13 2.49
PFA-22 23.6-24.8 2200 6.4 13 2.73
PFA-23 24.8-25.8 2300 7.9 11 3.68
PFA-24 25.8-26.3 2350 7.9 12 4.10
PFA-25 26.3-27.0 2400 7.9 12 4.19
PFA-27 27.9-28.9 2500 7.9 12 4.36
PFA-28 28.9-29.5 2500 7.9 13 4.73
PFA-29 29.5-30.7 2500 7.9 13 4.73
PFA-30 30.7-32.2 2500 9.3 12 6.10
PFA-31 32.2-33.7 2500 9.3 12 6.10
PFA-32 33.7-35.3 2500 9.3 13 6.80

Preformed armour rods are made of high strength aluminium alloy

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Design Features of Fuse Cutouts

The compact lightweight construction of the cutouts ensures complete ease of installation. Each unit is secured by a single bolt fixing at centre mounting point. An adjustable support bracket complete with bolts , nuts and washer is available on request and suitable for cross arm pole of wall mounting.

Insulation level for a given system voltage can vary considerably with climatic and environmental conditions. The availability of both single and double insulator style of cutouts can therefore provide and optimum choice in the selection of most suitable design

The active components of cutouts are common in design and have following features :-

  1. The fuse carrier drops down when the fuse element melts providing positive fault isolation and a clear indication that the cutout has operated
  2. The operating ring will accommodate most standard operating pole heads thus allowing the cutouts to be integrated into the system without the need for additional line operating equipment
  3. Installation and removal of fuse carrier is achieved by positive engagement of the operating pole head onto a pick up tongue positioned at the hinge end of the expulsion tube
  4. The fuse carrier is designed to accommodate standard expulsion Fuse Links of the button head pattern. Two speeds of operation are available :- Type K ( Fast operating ) and Type T ( Slow operating ) each with rating for 1 to amperes
  5. A spring loaded flipper and locking mechanism at the lower end of the fuse carrier ensured consistent tension on the fuse link and prevents element damage during close in. The flipper also assists rapid withdrawal of the fuse link from the tube under low fault conditions
  6. Current transfer is via high pressure silver plated contacts and is completely independent of the lower support hinge The lower contact arrangement ensures positive seating at the hinge point and limits degree of misalignment during close in It also assists the initial opening movement of the fuse carrier when operating
  7. The expendable cap design provides double venting during high fault current interruptions and single venting under low fault conditions Replacement diaphragms are supplied with each pack of fuse links
  8. The galvanized steel hood protects the top contact assembly from contamination and guides the fuse carrier into its correct latching position during close in
  9. Each cutout is supplied complete with connector terminals suitable for conductor sizes ranging from 4 to 10 mm diameter

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Service Drop Wire Clamp

CATALOG A B C D E F R
SDWC-01 196 148 70 02 14 50 10
  1. Service drop wire clamp consists of:-
  2. Shell made of stainless steel and serrated
  3. Wedge with attached tail made of stainless less
  4. Shim made of polyethylene or equal to induce smoother wedge action

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice