Conical Dead End Clamps

Catalog
Reference
Messenger
Maximum
L
Maximum
W
Maximum
CDE-CT-01 8 185 50
CDE-CT-02 12 250 60
  1. Conical dead end clamps can be used for terminating the aerial bundles cables on a pole or wall when used with other wall / pole fixing clamps
  2. The grips is designed such that it can accept a range of conductor diameter and still provide effective grip under load conditions
  3. The clamps , grips and nuts are made of high strength aluminium alloy and Bail is made of hot dip galvanized steel

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Anchoring Clamp

ANC-03-60008.00-10.0060003001650

Catalog no. RANGE OF COND
DIAMETER ( MM )
BREAKING
STRENGTH ( N )
L D PER BOX
ANC-01-2000 3.50-5.50 2000 120 12 100
ANC-02-2000 5.60-7.50 2000 120 12 100
ANC-02-3500 5.60-7.50 3500 200 14 100
  1. Clamps are capable to withstand dielectric strength of 6000V for one minute
  2. Anchoring clamp consists of body made of aluminium alloy or thermoplastic
  3. Wedge is made of zinc alloy or thermoplastic
  4. Bail is made of stainless steel or hot dip galvanized steel

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Preformed wrap guy / pole top make off

Catalog CABLE DIA L COLOR CODE
MIN MAX
GGL-010 4.83 5.02 940 WHITE
GGL-011 5.03 5.25 965 BLUE
GGL-012 5.26 5.48 990 YELLOW
GGL-013 5.49 5.71 1015 BLACK
GGL-014 5.72 5.98 1060 ORANGE
GGL-015 5.99 6.21 1120 RED
GGL-016 6.22 6.47 1140 GREEN
GGL-017 6.48 6.66 1245 WHITE
GGL-018 6.67 7.03 1270 BLUE
GGL-019 7.04 7.33 1295 YELLOW
GGL-020 7.34 7.63 1370 BLACK
GGL-021 7.64 7.97 1420 ORANGE
GGL-022 7.98 8.30 1470 RED
GGL-023 8.31 8.60 1550 GREEN
GGL-024 8.61 8.93 1600 WHITE
GGL-025 8.94 9.31 1620 BLUE
GGL-026 9.32 9.67 1650 YELLOW
GGL-027 9.68 10.05 1700 BLACK
GGL-028 10.06 10.45 1750 ORANGE
GGL-029 10.46 10.78 1880 ORANGE
GGL-030 10.79 11.14 1900 GREEN
GGL-031 11.15 11.50 1950 WHITE
GGL-032 11.51 11.83 2030 BLUE
GGL-033 11.84 12.18 2080 YELLOW
GGL-034 12.19 12.55 2130 BLACK

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Preformed Side Ties

Catalog MIN MAX L COLOR CODE
AWST 010 4.60 5.66 550 WHITE
AWST 011 5.67 6.27 550 BLUE
AWST 012 6.28 7.25 600 YELLOW
AWST 013 7.26 8.65 640 BLACK
AWST 014 8.66 9.54 640 ORANGE
AWST 015 9.55 10.82 640 RED
AWST 016 10.83 12.06 640 GREEN
AWST 017 12.07 13.46 680 WHITE
AWST 018 13.47 15.25 740 BLUE
AWST 019 15.26 17.38 760 YELLOW
AWST 020 17.39 18.95 760 BLACK
AWST 021 18.96 20.70 760 ORANGE
AWST 022 20.71 22.60 760 RED
AWST 023 22.61 24.64 760 GREEN
  1. Side ties are for use on AAC, AAAC, ACSR and ACAR conductors
  2. Side ties are made of high strength aluminium alloy or aluminium clad steel wires or galvanized steel depending on type of conductor
  3. Please specify conductor material, outside diameter, lay direction, Insulator reference, dimensions of groove at time of ordering

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Preformed Guy Grip Dead Ends

Catalog DIA MIN DIA MAX L COLOR CODE CATALOG DIA MIN DIA MAX L COLOR CODE
PP-GG-01 3.85 4.01 430 BLACK PP-GG-21 8.96 9.30 790 GREEN
PP-GG-02 4.02 4.19 440 BLACK PP-GG-22 9.31 9.68 830 GREEN
PP-GG-03 4.20 4.40 470 BLACK PP-GG-23 9.69 10.06 860 WHITE
PP-GG-04 4.41 4.60 480 ORANGE PP-GG-24 10.07 10.45 860 WHITE
PP-GG-05 4.61 4.80 520 ORANGE PP-GG-25 10.46 10.80 880 BLUE
PP-GG-06 4.81 5.00 520 ORANGE PP-GG-26 10.81 11.10 880 BLUE
PP-GG-07 5.01 5.23 530 RED PP-GG-27 11.11 11.45 920 BLUE
PP-GG-08 5.24 5.46 550 RED PP-GG-28 11.46 11.75 1000 BLACK
PP-GG-09 5.47 5.69 560 GREEN PP-GG-29 11.76 12.05 1075 BLACK
PP-GG-10 5.70 5.94 580 GREEN PP-GG-30 12.06 12.55 1150 ORANGE
PP-GG-11 5.95 6.20 610 BLUE PP-GG-31 12.56 13.05 1270 ORANGE
PP-GG-12 6.21 6.45 620 BLUE PP-GG-32 13.06 13.50 1300 RED
PP-GG-13 6.46 6.73 640 YELLOW PP-GG-33 13.51 13.94 1350 RED
PP-GG-14 6.74 7.01 660 YELLOW PP-GG-34 13.95 14.53 1380 GREEN
PP-GG-15 7.02 7.32 670 BLACK PP-GG-35 14.54 15.15 1460 GREEN
PP-GG-16 7.33 7.62 685 BLACK PP-GG-36 15.16 15.75 1530 BLUE
PP-GG-17 7.63 7.95 710 ORANGE PP-GG-37 15.76 16.36 1630 BLUE
PP-GG-18 7.96 8.28 740 ORANGE
PP-GG-19 8.29 8.58 760 RED
PP-GG-20 8.59 8.95 780 RED
  1. Guy grip dead ends are made of galvanized steel confirming to BS 443
  2. Heavy coating as per Class A-C of ASTM A495 are also available on request

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Drop wire dead ends

Catalog A B D
PPDE – 01 450 85 02
  1. Drop wire dead ends are made of stainless steel with
  2. Applied length coated with neoprene / polyvinyl compounds
  3. For use with insulated and jacketed conductors

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Preformed Armour Rod

Catalog Range Length Diameter Per Set Weight
PFA-10 14.0-14.9 1500 4.6 11 0.81
PFA-11 15.0-15.4 1550 4.6 12 0.91
PFA-12 15.5-16.0 1600 4.6 12 0.95
PFA-13 16.0-16.7 1600 4.6 12 0.95
PFA-14 16.7-17.3 1650 4.6 12 1.05
PFA-15 17.3-17.9 1700 5.2 12 1.29
PFA-16 17.9-18.8 1800 5.2 12 1.35
PFA-17 18.8-19.9 1800 5.2 13 1.47
PFA-18 19.9-20.7 1900 6.4 11 1.99
PFA-19 19.9-20.7 1900 6.4 11 1.99
PFA-20 21.4-23.1 1950 6.4 12 2.25
PFA-21 23.1-23.6 2000 6.4 13 2.49
PFA-22 23.6-24.8 2200 6.4 13 2.73
PFA-23 24.8-25.8 2300 7.9 11 3.68
PFA-24 25.8-26.3 2350 7.9 12 4.10
PFA-25 26.3-27.0 2400 7.9 12 4.19
PFA-27 27.9-28.9 2500 7.9 12 4.36
PFA-28 28.9-29.5 2500 7.9 13 4.73
PFA-29 29.5-30.7 2500 7.9 13 4.73
PFA-30 30.7-32.2 2500 9.3 12 6.10
PFA-31 32.2-33.7 2500 9.3 12 6.10
PFA-32 33.7-35.3 2500 9.3 13 6.80

Preformed armour rods are made of high strength aluminium alloy

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice

Design Features of Fuse Cutouts

The compact lightweight construction of the cutouts ensures complete ease of installation. Each unit is secured by a single bolt fixing at centre mounting point. An adjustable support bracket complete with bolts , nuts and washer is available on request and suitable for cross arm pole of wall mounting.

Insulation level for a given system voltage can vary considerably with climatic and environmental conditions. The availability of both single and double insulator style of cutouts can therefore provide and optimum choice in the selection of most suitable design

The active components of cutouts are common in design and have following features :-

  1. The fuse carrier drops down when the fuse element melts providing positive fault isolation and a clear indication that the cutout has operated
  2. The operating ring will accommodate most standard operating pole heads thus allowing the cutouts to be integrated into the system without the need for additional line operating equipment
  3. Installation and removal of fuse carrier is achieved by positive engagement of the operating pole head onto a pick up tongue positioned at the hinge end of the expulsion tube
  4. The fuse carrier is designed to accommodate standard expulsion Fuse Links of the button head pattern. Two speeds of operation are available :- Type K ( Fast operating ) and Type T ( Slow operating ) each with rating for 1 to amperes
  5. A spring loaded flipper and locking mechanism at the lower end of the fuse carrier ensured consistent tension on the fuse link and prevents element damage during close in. The flipper also assists rapid withdrawal of the fuse link from the tube under low fault conditions
  6. Current transfer is via high pressure silver plated contacts and is completely independent of the lower support hinge The lower contact arrangement ensures positive seating at the hinge point and limits degree of misalignment during close in It also assists the initial opening movement of the fuse carrier when operating
  7. The expendable cap design provides double venting during high fault current interruptions and single venting under low fault conditions Replacement diaphragms are supplied with each pack of fuse links
  8. The galvanized steel hood protects the top contact assembly from contamination and guides the fuse carrier into its correct latching position during close in
  9. Each cutout is supplied complete with connector terminals suitable for conductor sizes ranging from 4 to 10 mm diameter

NOTE:
Other sizes available on request
All dimensions in mm / inches * We reserve the right to change design & construction without prior notice